Characteristics of oil film feeder

Oil film feeder system features: 1. Classic low pressure hydraulic control system, energy saving and environmental protection design. 2. Rigorous process design ensures higher energy efficiency. 3. Compact structure, stable operation, long service life, high processing accuracy, convenient and fast refueling. 4. Unique exhaust device, low noise, five leakage, material without wear. 5. The whole machine can not be welded by argon fluorine welding process, the machine deformation is small. 6. All components ensure good interchangeability, ensure good maintenance and replacement of parts in the future. 7. The main purpose of CNC lathe automatic feeding machine is to save labor (one person can control more than one set of feeding machines), automation: save cutting, single feeding time, but also save saw material to produce tail material.

2019-01-14

Working principle of automatic bar feeder

First, the workpiece to be processed will be stacked in the storage rack platform stacked area, so that part of the workpiece neatly discharged in the storage rack slope. Adjust the relevant parts of the lathe and make it enter the state to be processed. The power supply of automatic bar feeder is pulled to the open position, and then press the green button, the conveyor wheel rotates, adjust the conveying speed, press the automatic button, the feeding cylinder moves upward, and the workpiece is held up. In the process of holding up, the bracket with a certain inclination rolls forward 100MM, so that it reaches the top of the conveyor wheel. Then, the cylinder slowly drops, the workpiece without vibration, smoothly placed on the conveying wheel, and with the rotation of the conveying wheel, so that the workpiece into the processing area (the speed of entry is controlled by a stepless governor, therefore, the workpiece can be pushed to the ideal speed). When all the workpiece into the processing area, there is no workpiece before the induction switch, and the charging cylinder under the storage tank is informed after being perceived, that is, the operation of the second workpiece begins.

2019-01-14

Common faults of centrifuge feeder

Equipment in the operation will inevitably appear some failures, centrifuge feeding machine is not another. Common troubleshooting methods: A centrifuge feeder feeding error 1. Check whether the pressure of the press plate is uniform and adjust the pressure of the loosening device.

2019-01-14

< 1 >